Vai al contenuto

[NAIAS] - Mazda MX crossport


carrera4

Messaggi Raccomandati:

  • Risposte 24
  • Creato
  • Ultima Risposta

I più attivi nella discussione

Giorni di maggior attività

I più attivi nella discussione

ripreso da www.carspyshots.tk

... Mazda was also totally silent on drivetrain or chassis plans, only revealing the MX-Crossport is 4630mm long, 1930mm wide and has a long 2795mm wheelbase.

However, as this car is being pitched as a direct competitor for the Nissan Murano in North America, a V6 engine makes sense. At the moment the only V6 Mazda has available to it is the Ford family 3.0-litre Duratec.

The underlying platform for the production car also appears to be a Ford family affair, with the plan being to mount it on an adaptation of the corporate C1 architecture.

C1 is already used by Mazda for the compact 3 model and the new 5, which is the small people-mover that replaced the Premacy. It also underpins the Ford Focus and Fusion and Volvo S and V40.

European reports say the platform is known as C1+ and will be used for future Volvo S60, V70 and S80, as well as the rumoured XC50 small SUV. Land Rover will use it for the Freelander.

Ford is developing two vehicles off C1+, five and seven-seat versions of a cross-over known internally as SAV, or Sport Activity Vehicle, as well as a radical replacement for the Galaxy people-mover.

Engines linked to the C1+ project include four and five-cylinder petrol units and a new generation turbo-diesel family.

Transmission choices are said to include five and six-speed manual, CVT and a new dual-clutch design. All-wheel drive will be optional.

articolo completo --> http://www.goauto.com.au/mellor/mellor.nsf/story2/85BC3D624D197AC4CA256F6B000AE3B2

plancia --> 2004.12.13_M_Mazda_crossove.jpg

Link al commento
Condividi su altri Social

Crea un account o accedi per lasciare un commento

Devi essere iscritto per commentare e visualizzare le sezioni protette!

Crea un account

Iscriviti nella nostra community. È facile!

Registra un nuovo account

Accedi

Sei già registrato? Accedi qui.

Accedi Ora

×
×
  • Crea Nuovo...

 

Stiamo sperimentando dei banner pubblicitari a minima invasività: fai una prova e poi facci sapere come va!

Per accedere al forum, disabilita l'AdBlock per questo sito e poi clicca su accetta: ci sarai di grande aiuto! Grazie!

Se non sai come si fa, puoi pensarci più avanti, cliccando su "ci penso" per continuare temporaneamente a navigare. Periodicamente ricomparità questo avviso come promemoria.