Vai al contenuto

Messaggi Raccomandati:

Inviato (modificato)

Messaggio Aggiornato al 18/02/2015

1650096545341528638.jpg

2239913861692035669.jpg

1748350182583220856.jpg

6468742061344982064.jpg

1712731112235508908.jpg

Geneva15_McLaren%2BP1%2BGTR_16.jpg

Geneva15_McLaren%2BP1%2BGTR_01.jpg Geneva15_McLaren%2BP1%2BGTR_02.jpg Geneva15_McLaren%2BP1%2BGTR_03.jpg Geneva15_McLaren%2BP1%2BGTR_05.jpg

Geneva15_McLaren%2BP1%2BGTR_06.jpg Geneva15_McLaren%2BP1%2BGTR_07.jpg Geneva15_McLaren%2BP1%2BGTR_08.jpg Geneva15_McLaren%2BP1%2BGTR_09.jpg

Geneva15_McLaren%2BP1%2BGTR_10.jpg Geneva15_McLaren%2BP1%2BGTR_11.jpg Geneva15_McLaren%2BP1%2BGTR_12.jpg Geneva15_McLaren%2BP1%2BGTR_13.jpg

Geneva15_McLaren%2BP1%2BGTR_14.jpg Geneva15_McLaren%2BP1%2BGTR_15.jpg Geneva15_McLaren%2BP1%2BGTR_16.jpg McLaren-F1GTR_P1GTR-Cadwell-073.jpg

McLaren-F1GTR_P1GTR-Cadwell-083%2B(2).jpg

carscoops

Press Release:

McLAREN P1™ GTR TO SHOW ITS LIMITED PRODUCTION FORM IN GENEVA

- Makes the transition from concept to production with track tested modifications

- Tuning in development results in 10 percent more downforce than the McLaren P1™ road car

- Lightweight components and motorsport technologies trim a further 50kg

- McLaren P1™ GTR Driver Programme confirms first locations

- Geneva Show car livery inspired by iconic McLaren F1 GTR, chassis #06R

- McLaren P1™ GTR will premiere alongside the recently announced McLaren 675LT on Stand 1240, Hall 1 at 12.15 CET (11.15 GMT) on Tuesday, 3 March

The track-dedicated 1000PS McLaren P1™ GTR will debut at the 85th International Geneva Motor Show in limited production form with only minor modifications to the Design Concept presented just six months ago. The most noticeable change is the livery that the Geneva show car will be sporting. It is one which will be available to the fortunate few who will be joining the McLaren P1™ GTR Driver Programme that kicks off at the Circuit de Catalunya in Spain later this year. The design is homage to the yellow and green McLaren F1 GTR, chassis #06R, which has claimed its own place in history as one of the five F1 GTRs that dominated the 24 Hours of Le Mans in the historic debut by McLaren 20 years ago.

From design concept to the track

The McLaren P1™ GTR has completed an extensive and intense testing schedule across the world following the unveil of the Design Concept at the Pebble Beach Concours d'Elegance last summer. This has produced enhancements to the original design to optimise aerodynamic performance and cooling.

The front track is 80mm wider than the road-going McLaren P1™ and with its aggressively profiled front splitter, the also car sits 50mm lower to the ground on centre-locking 19-inch motorsport alloy wheels shod with Pirelli slick tyres. The lower bodywork is trimmed with a sleek aerodynamic blade as previewed on the design concept, which cleans the flow of air along the car's flanks.

The lightweight windscreen from the McLaren P1™ road car, measuring just 3.2mm thick, has been retained, while the side windows are now motorsport-specification polycarbonate with a sliding 'ticket window' on the driver's side. The chemically toughened glass panels in the roof have been replaced with carbon fibre panels to give the cabin a more enclosed, cocooned environment, as has the engine bay cover. The weight saving measures on the McLaren P1™ GTR combine to strip out 50kg over the road-going model.

The rear of the track-only model is dominated, in contrast to the road-going McLaren P1™, by the presence of a fixed-height wing which sits more than 400mm above the sculpted rear bodywork – an increase of over 100mm of the adjustable wing on the road car. Working in conjunction with the front-mounted aerodynamic flaps ahead of the front wheels, the rear wing helps to increase downforce levels by more than 10 percent – meaning up to 660kg at 150 mph. Mounted on light weight carbon fibre pylon supports, the wing retains the DRS (Drag Reduction System) of the road car, which trims the pitch from 32° to 0° at the push of the button on the steering wheel. Another bold and differentiating feature at the rear are the large twin exhaust pipes, formed from an Inconel and titanium alloy. This system saves in excess of 6.5kg over the already light road-going system.

Significant updates and modifications to the IPAS powertrain have been made beneath the 'shrinkwrapped' carbon fibre bodywork. At its heart, the McLaren P1™ GTR seamlessly integrates the 3.8-litre twin-turbo V8 petrol engine with an enhanced lightweight electric motor. Combined, these powerplants generate 1,000PS; 800PS (789bhp) is produced by the petrol engine, coupled to 200PS (197bhp) available immediately from the electric motor.

The powertrain has been thoroughly revised for optimum performance on track, with key components replaced with motorsport-developed parts, more suited to the sustained high speed running the cars will be subjected to. In addition to this, features within the powertrain of the McLaren P1™ designed specifically for public highway use have been removed to reduce weight.

McLaren F1 GTR #06R: inspiring a new generation

McLaren F1 GTR chassis #06R was campaigned successfully throughout the 1995 and 1996 seasons with Mach One Racing, and is one of the longest serving examples of the McLaren F1 GTR in competition. The Harrods-sponsored #51 was famously one of seven McLaren F1 GTRs to compete at the 24 Hours of Le Mans in 1995, and was driven to the final podium position by multiple Le Mans race winner Derek Bell, his son Justin, and Andy Wallace. After this result, the team went on to win the final three races of the BPR Championship.

The following year, the team enjoyed another strong campaign. Oliver Grouillard joined Derek Bell and Andy Wallace in the line-up for the 24 Hours of Le Mans, and finished a commendable sixth. The team also claimed a win at Silverstone in the Global GT Endurance championship.

McLaren P1™ Driver Programme

The first locations for the first McLaren P1™ Driver Programme have now been confirmed, and will see drivers attend an initial test session at Silverstone, England, followed by the first on-track activity at Circuit de Catalunya in Spain. These events will follow on from individual driver profiling sessions at the McLaren Technology Centre. These tailored consultations will include a race seat fitting, a Human Performance Centre assessment, and final discussions around the design and livery of each model with McLaren Automotive Design Director Frank Stephenson. Each driver will also experience the McLaren P1™ GTR from the simulator for the first time.

Ultimate Series forms the third and final tier of the McLaren model line-up

The McLaren P1™ GTR joins the road-going McLaren P1™ in the Ultimate Series. This exclusive range prioritises aerodynamics and outright performance through notable advances in weight reduction, chassis and powertrain engineering and the use of pioneering materials.

McLaren has now established a three tier naming structure of Sports Series, Super Series and Ultimate Series. The Sports Series is the entry point to McLaren and will make its global debut at the 2015 New York International Auto Show in April. Above this sits the core McLaren Super Series, comprising the 650S, the Asia-only 625C and the recently-announced 675LT which will premiere at the Geneva Motor Show.

The McLaren P1™ GTR will make its global debut alongside the recently announced McLaren 675LT on Stand 1240, Hall 1 at 12.15 CET (11.15 GMT) on Tuesday, 3 March 2015 at the 85th International Geneva Motor Show.

McLaren

Concept Pre-Serie

10083274841834809071.jpg

664679513468495895.jpg

18351933041781643053.jpg

6431598081836121603.jpg

3281831731577166804.jpg

WCF

Press Release Concept Pre-Serie:

  • Design concept previews the dramatic look of the ultra-exclusive track-focused racer
  • One clear goal: to be the best driver’s car in the world on track
  • Increased power to 1,000PS (986 bhp) from the motorsport-optimised 3.8-litre twin-turbo V8 petrol engine and lightweight electric motor
  • Built, maintained and run by McLaren Special Operations
  • Further details of bespoke McLaren P1™ GTR driver training programme confirmed

Twenty years ago, the then soon-to-be-launched McLaren F1 GTR began testing ahead of an assault on the 1995 GT season. The track derivative, as the road-going version had done, rewrote the rule book and the claimed victories and titles across the globe in the years that followed, securing a place in motorsport folklore. Two decades on, and the covers have been pulled off the dramatic and purposeful McLaren P1™ GTR design concept during a private event at the Pebble Beach Concours d’Elegance event in California. The aggressive racing concept is a preview to the final model which, with a little under a year until production commences, has now entered the next phase as the development team works to hone and further optimise the ultimate track-focused racer.

With no need to meet the legislations for road legality, the McLaren P1™ GTR will be the most track-tailored and most powerful model produced by McLaren Special Operations to date, with a clear target even more focused than its road-going sibling: to be the best driver’s car in the world on track. With even greater emphasis on aerodynamic performance through the dramatic bodywork, the McLaren P1™ GTR will also feature race-proven slick tyres, a fixed ride height, enhanced power delivery from the IPAS powertrain and Formula 1™-derived DRS from the large, fixed rear wing and an ERS-style push-to-pass system, all combining to offer the ultimate track experience.

Aerodynamically optimised to offer more extreme performance

Based on the McLaren P1™ road car, the track-focused McLaren P1™ GTR design concept further optimises the aerodynamically efficient ‘shrink-wrapped’ body shape in order to offer maximum performance, superior handling characteristics and optimised driver engagement on track. A host of changes have been made, and the car has been thoroughly re-engineered from the ground up to ensure the McLaren P1™ GTR achieves its target of being the ultimate drivers’ car on track.

The front track of the McLaren P1™ GTR design concept has been increased by 80mm and is coupled with a more aggressive GT-style front splitter. Reprofiled low temperature radiator ducts seamlessly flow into the leading edge of the aggressively flared front wheelarches, while the active aerodynamic flaps are retained from the McLaren P1™ in the floor ahead of the front wheels.

The bodywork is ‘shrink-wrapped’ around the carbon fibre MonoCage chassis behind the front wheels, and is designed to channel the air from around the wheel well. An additional aerodynamic blade is located behind the wheelarch to clean the air from the front tyres. This aero device flows seamlessly along the bottom edge of the dihedral doors, along the flank of the carbon fibre bodywork, to an additional side panel at the rear which ducts additional air into the high temperature radiator and improves the aerodynamic performance of the rear floor.

The profile of the McLaren P1™ GTR design concept remains as dramatic as ever, hunkered down on to the race-prepared suspension with a fixed ride height, lower than the standard car. The snorkel air intake, inspired by the design of the original McLaren F1, is still present within the roof structure of the carbon fibre MonoCage chassis. The wing mirrors have been repositioned to the A pillars, to put them closer to the eye line of the driver and reduce aerodynamic drag, while the trailing edge of the door-mounted radiator channels have been extended to draw more air down through the cavity within the door, and into the engine to aid cooling.

A set of lightweight 19-inch motorsport alloy wheels are fitted – 10.5-inches wide at the front, 13-inches at the rear – and are secured into place with quick-release centre locking nuts. Tyre changes are made easier through an onboard air jacking system, similar to that seen on the McLaren 650S GT3 racer.

At the rear, a large, twin-element wing is mounted on dramatic carbon fibre pylons which extend around the rear of the bodywork. This fixed height wing is fitted with a hydraulically operated Drag Reduction System (DRS) to boost acceleration performance, and has been honed to provide increased levels of downforce compared to the road car, working with the active aerodynamic flaps located ahead of the front wheels. The active aerodynamic devices optimise aerodynamic balance through all phases of cornering. The bodywork of the car has been reprofiled to improve aerodynamic efficiency below the large rear wing, and incorporates a quick-release system without affecting the rear wing. The road legal McLaren P1™ stows the rear wing within the bodywork, but with the fixed height wing, and therefore no pistons or moving mechanical parts, the bodywork of the McLaren P1™ GTR design concept behind the engine bay is now a smooth, flowing surface, feeding clean air below the wing and over the back of the car.

Below the rear wing sits the exposed, centrally mounted exhaust, which is an all new design, developed exclusively for the McLaren P1™ GTR. Made from inconel and titanium alloy, the system maximises the aural characteristic of the higher output 3.8-litre twin turbo V8 engine to maintain, and further emphasise, the McLaren sound. The design of the exhaust has also changed, with a straight cut twin pipe setup now used in place of the single exit exhaust.

Airflow is managed carefully across the whole car and channelled in the most efficient and effective ways possible. This includes the air below the car, and a large carbon fibre diffuser dominates the lower half of the rear of the car. This is designed to work in tandem with the rear wing to enhance rear downforce and grip levels. The McLaren P1™ GTR design concept runs on the bespoke slick tyres designed by technical partners Pirelli in collaboration with McLaren, designed to offer a greater level of grip, cornering agility and handling balance. These characteristics enable much later braking into corners, higher apex speeds, and the earlier application of the throttle on the exit of corners, which lead to improved lap times.

Modern interpretation is more than just a family resemblance

The design concept unveiled at Pebble Beach wears a livery which harks back to the original McLaren to wear the GTR badge. During the rigorous testing programme for the F1 GTR, the test car, chassis #01R, originally wore a distinctive orange and silver livery. This colour scheme has been reinterpreted for the model, with the number, 01, signifying the original chassis number. That car eventually went on to take the coveted win at the 1995 24 Hours of Le Mans.

The McLaren P1™ GTR driver programme

Launching with the McLaren P1™ GTR design concept is the bespoke McLaren P1™ GTR driver programme – the ultra-exclusive ownership programme which will include specialist driver training, human performance and access to the McLaren racing simulator, and which is designed to prepare each driver mentally and physically to fully exploit the abilities of the McLaren P1™ GTR. The programme will be completely bespoke, with each individual having a fully-tailored experience.

The McLaren P1™ GTR driver programme promises to be one of the most exclusive owners’ clubs in the world and will offer an unrivalled ownership experience. McLaren Special Operations will maintain and run all cars, and manage the programme throughout. Together with one of the most exciting track-focused cars ever developed, the programme offers unprecedented access to the technologies, resources and people throughout the McLaren Technology Centre. Every experience will be unique and tailored specifically, providing a full immersion into McLaren, and gaining access to the experiences and resources which have helped develop and train Formula 1™ champions. This will include working closely with a support team comprising authentic professionals that have operated within the rarefied world of professional motor sport. These will all be experts in their respective fields, all boasting top-level international experience from the Human Performance Programme, race engineers, designers and test drivers.

McLaren

Ecco la P1 track oriented, in mostra a Peeble Beach ancora come Concept preserie.

Modificato da Touareg 2.5

 News al 02/12/2015: Mazda 2.

  • Risposte 20
  • Creato
  • Ultima Risposta

I più attivi nella discussione

I più attivi nella discussione

Inviato (modificato)

Pare siano previsti 25 esemplari, ognuno a 1,98 milioni (di euro o sterline (:shock:) a seconda della fonte..) compresi il programma corse e supporto ufficiale.

autoblog.nl

McLaren-P1-GTR-002.jpg

McLaren-P1-GTR-003.jpg

McLaren-P1-GTR-004.jpg

McLaren-P1-GTR-005.jpg

Scarichi in PVC? :mrgreen:

imgF.gif

Infographic ufficiale

P1%20infographic%20hi%20res_MK%20edit.jpg?t=w1440

Modificato da Touareg 2.5

Firma

Inviato
Sarebbe la versione inglese della FXX per capirci?

Si, si tratta di un operazione simile, anche se forse dovrebbe riservare qualche libertà in più al cliente.

The McLaren P1™ GTR driver programme

Launching with the McLaren P1™ GTR design concept is the bespoke McLaren P1™ GTR driver programme – the ultra-exclusive ownership programme which will include specialist driver training, human performance and access to the McLaren racing simulator, and which is designed to prepare each driver mentally and physically to fully exploit the abilities of the McLaren P1™ GTR. The programme will be completely bespoke, with each individual having a fully-tailored experience.

The McLaren P1™ GTR driver programme promises to be one of the most exclusive owners’ clubs in the world and will offer an unrivalled ownership experience. McLaren Special Operations will maintain and run all cars, and manage the programme throughout. Together with one of the most exciting track-focused cars ever developed, the programme offers unprecedented access to the technologies, resources and people throughout the McLaren Technology Centre. Every experience will be unique and tailored specifically, providing a full immersion into McLaren, and gaining access to the experiences and resources which have helped develop and train Formula 1™ champions. This will include working closely with a support team comprising authentic professionals that have operated within the rarefied world of professional motor sport. These will all be experts in their respective fields, all boasting top-level international experience from the Human Performance Programme, race engineers, designers and test drivers

Inviato

si dimostra come al solito che quando si vuole far sul serio veramente, ci vuole l'alettone posteriore, altro che quelli mobili e altre cavolate.

Ali maxi per tutti!

Guidatore medio di S.w. mi piacciono le auto , fumatore Light e AD INTERIM convivente... questo è nicogiraldi....

875kg - 260+ cv i numeri del mio piacere

Inviato

Accidenti! Lo stendipanni-alettone e buona parte del posteriore me li sarei aspettati, più spigolosi, su una Lamborghini estrema. Bel posteriore!

Crea un account o accedi per lasciare un commento

Devi essere iscritto per commentare e visualizzare le sezioni protette!

Crea un account

Iscriviti nella nostra community. È facile!

Registra un nuovo account

Accedi

Sei già registrato? Accedi qui.

Accedi Ora

×
×
  • Crea Nuovo...

 

Stiamo sperimentando dei banner pubblicitari a minima invasività: fai una prova e poi facci sapere come va!

Per accedere al forum, disabilita l'AdBlock per questo sito e poi clicca su accetta: ci sarai di grande aiuto! Grazie!

Se non sai come si fa, puoi pensarci più avanti, cliccando su "ci penso" per continuare temporaneamente a navigare. Periodicamente ricomparità questo avviso come promemoria.